COMMERCIAL VEHICLE MODULES

USB dongle for Eculite.

     The module allows showing, editing, and comparing the error mask of the BOSCH EDC7UC31 ECU for Kamaz vehicles. It shows error codes according to OBD/SEA (P-Code), SPN, Customer code, and KTS code.
     The DTC comparison mode allows seeing the values of the files compared, error search using the OBD, SPN, Customer code, KTS code, the description matches. And the display of the extended identifiers of the file. Note: For checksum correction we recommend Combiloader. Combiloader will correct the checksums automatically.

Supported :

702V141_740.60-360-290812_5460-4010142-01
702V141_740.60-360-290812_6460-4010122-01
702V141_740.602-360-170214_5350-4010121-01
702V141_740.602-360-170214_6460-4010122-01
702V141_740.61-320-290812_5460-4010142-01
702V141_740.61-320-290812_6460-4010122-01
702V141_740.612-320-170214_6460-4010122-01
702V141_740.62-280-290812_5460-4010142-01
702V141_740.62-280-290812_6460-4010122-01
702V141_740.622-280-170214_5350-4010121-01
702V141_740.622-280-170214_65111-4010121-01
702V141_740.622-280-260815_5350-4010121
702V141_740.622-280-280915_65111-4010121
702V141_740.63-400-290812_5460-4010142-01
702V141_740.63-400-290812_6460-4010122-01
702V141_740.632-400-170214_65111-4010121-01
702V141_740.632-400-170214_6560-4010121-021
702V141_740.642-420-170214_65111-4010121-01
702V141_740.652-260-170214_5350-4010121-01
702V141_740.662-300-170214_65111-4010121-01
702V141_740.662-300-170214_65111-4010121-02
702V141_740.662-300-290812_5350-4010121
702V141_740.73-400-070714_6460-4010122-01
702V141_740.73-400-070714_6460-4010141-01
702V141_740.73-400-070714_6460-4010141-02
702V141_740.73-400-290812_6460-4010122-01

986702V310_740.705-300-020418_5350-4010010-16_OFF_FAN_OFF_EFU
986702V310_740.705-300-020418_65115-4010010-16
986702V310_740.705-300-190618_5350-4010010-16_OFF_FAN_ON_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_OFF_FAN_OFF_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_OFF_FAN_ON_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_ON_FAN_ON_EFU_20-06-18
986702V310_740.735-400-020418_5350-4010010-16_FAN

     The module allows to display, edit and compare the DTC for GAZ, PAZ vehicles with YaMZ 53xx engine, EDC17CV44/54 ECU. For editing, calibrations of boost pressure, fuel pressure, fuel supply, fuel supply correction, injection phase, torque request and limit, sensor calibration, DTC error mask are available.

Supported Software:

P_1639.1.2.0_YMZ-53422-30_S3.4_26.10.2016
P_1639.1.2.0_YMZ-53423-school_S3.7_22.07.2016
P_1639.1.2.0_YMZ-53423_S3.7_18.07.2016
P_1639.1.2.0_YMZ-53443-10_S3.5_26.10.2016
P_1639.1.2.0_YMZ-53443-12_S3.8_26.10.2016
P_1639.1.2.0_YMZ-53443-20_S3.3_06.04.2016
P_1639.1.2.0_YMZ-53443-20_S3.5.1_23.08.2016
P_1639.1.2.0_YMZ-53443-20_S3.5_18.07.2016
P_1639.1.2.0_YMZ-53443-20_S3.6_12.10.2016
P_1639.1.2.0_YMZ-53443-20_S3.7_26.10.2016
P_1639.1.2.0_YMZ-53443-22_S3.6.2_26.08.2016
P_1639.1.2.0_YMZ-53443-22_S3.6_19.08.2016
P_1639.1.2.0_YMZ-53443-22_S3.7_12.10.2016
P_1639.1.2.0_YMZ-53443-22_S3.8.1_25.10.2016
P_1639.1.2.0_YMZ-53443-22_S3.9_26.10.2016
P_1639.1.2.0_YMZ-53443-30_S3.6.2_30.08.2016
P_1639.1.2.0_YMZ-53443-30_S3.7_12.10.2016
P_1639.1.2.0_YMZ-53443-30_S3.8_26.10.2016
P_1639.3.0.0_YMZ-53422-21_S3.9_15.03.2019
P_1639.3.0.0_YMZ-53422-22_S3.4_15.03.2019
P_1639.3.0.0_YMZ-53422-23_S3.6_15.03.2019
P_1639.3.0.0_YMZ-53423_S3.25_09.01.2018
P_1639.3.0.0_YMZ-53423_S3.26_31.01.2018
P_1639.3.0.0_YMZ-53442-20_S3.10_15.03.2019
P_1639.3.0.0_YMZ-53443-10_S3.21_15.03.2019
P_1639.3.0.0_YMZ-53443-11_S3.4_15.03.2019
P_1639.3.0.0_YMZ-53443-12_S3.14_10.01.2018
P_1639.3.0.0_YMZ-53443-12_S3.17_15.03.2019
P_1639.3.0.0_YMZ-53443-20_S3.13_04.07.2017
P_1639.3.0.0_YMZ-53443-20_S3.14_11.08.2017
P_1639.3.0.0_YMZ-53443-20_S3.16_10.01.2018
P_1639.3.0.0_YMZ-53443-20_S3.19_15.03.2019
P_1639.3.0.0_YMZ-53443-20_S3.21_28.01.2020
P_1639.3.0.0_YMZ-53443-40_S3.4_15.03.2019
P_1639.3.0.0_YMZ-53443-41_S3.2_15.03.2019
P_1639.3.0.0_YMZ-53443-50_S3.6_15.03.2019
P_1639.3.0.0_YMZ-53443-51_S3.3_15.03.2019
P_1639.3.0.0_YMZ-53445-20_S3.12_10.01.2018
P_1639.3.0.0_YMZ-53445-20_S3.17_15.03.2019
P_1639.3.0.0_YMZ-53445-22_S3.7_02.11.2018
P_1639.3.0.0_YMZ-53445-22_S3.8_15.03.2019
P_1639.3.0.0_YMZ-53445-80_S3.1_02.11.2018

P1076V100_GAZ_245.7_3309_101281C000_S02
P1076V100_GAZ_245.7_3309_101281C040_S03
P1076V100_GAZ_D245.7E4_3308_101281C000_S05
P1076V100_GAZ_D245.7E4_3309_101281C040_S05
P1076V100_GAZ_D245.7E4_3309_101681C040_S05
P1076V200_GAZ3309_D245.7E4_101281C040_S07

The module allows viewing, editing, and comparing the DTC mask of Kamaz vehicles with Mercedes engine and MR PLD SW 24 °C ECU.

The module does not correct the checksums of the COP in the firmware.
Reading and writing are recommended to be done using the AutoVEI TruckExplorer programmer (Kamatic package), this programmer corrects the checksums of the COP before writing to the ECU.

Supported (Dataset):

A 013 443 01 40 ZGS 001
A 083 447 44 40 ZGS 001
A 083 447 52 40 ZGS 001
A 906 443 25 40 ZGS 001

GAZ with Cummins ISF2.8, ISF3.8 engine with Continental CM2220.

The module also supports checksum corrections.

Supported software:

BBH_BS90010_03
BBH_BS90010_04
BBH_BS90025_02
BBH_BS90065_01
BBK_BV90007_01
BBK_BV90010_03
BDX_EL80010-05
BDX_EL80011_05
BDX_EL80015_05
BDX_EL80025_03
BGY_HG80003_01
BGY_HG80003_02
BGY_HG80003_03
BGY_HG80003_04
BGY_HG80003_05
BGY_HG80003_06
BGY_HG80003_07
BGY_HG80013_00
BGY_HG80015_00
BIS_JA10012_02
BIS_JA10013_00
BIS_JA10036_00
BIS_JA10037_00

The module allows to show, edit and compare the files of Kamaz with 4.5L and 6.7L Cummins engines and Continental CM2150, CM2200, CM2880.

The DTC is displayed according to the OBD/SAE standard (P-Code), SPN, Customer code, KTS code. The DTC comparison mode allows seeing the values of the files compared, error search using the OBD, SCR, SPN, Customer code, KTS code, the description matches. And the display of the extended identifiers of the file.

Supported software:

BEU_FF80002_04
BEU_FF80006_00
BEU_FF80008_02
BEU_FF80009_00
BEU_FF80009_02
BEU_FF80009_03
BEU_FF80009_04
BEU_FF80009_06
BEU_FF80010_02
BEU_FF80012_02
BEU_FF80013_02
BEU_FF80013_04
BEU_FF80017_00
BEU_FF80017_01
BEU_FF80018_00
BFR_FX80023_03
BFR_FX80023_05
BFR_FX80024_03
BFR_FX80025_03
BFR_FX80025_05
BFR_FX80032_01

     Module Kamaz Cummins CM2xxx 8.9 allows to view, edit, compare firmware files for Kamaz vehicles with Cummins 8.9 engine with Continental CM2880 control unit. Module contains over 2000 basic calibrations.

     Calibrations are available for torque request, injection quantity, injection phase, fuel pressure, emergency modes, starting calibrations, SCR systems, DTC error mask, etc.

Continental CM2150, CM2200, CM2220, CM2350, CM2880.

     The module allows to view and edit large statistics data (mileage, fuel used), speed limit, and transmission protection parameters in the *.cfg assembly files, that were read using the Combiloader programmer with the Cummins CM2xxx module. It is possible to open files of ANY, construction, and road vehicles with a Cummins engine.
The most important condition is the ability to read and write the *.cfg configuration file using Combiloader.

The module allows viewing, editing, and comparing the DTC mask of Mercedes, MAZ, agricultural machinery ROPA, as well as any other vehicle with a Mercedes engine control unit MR PLD SW version 24C. Support for versions 24B, 23E, and Automatically error patch "4058 The data record in control module MR engine control has been manipulated" will also be added.
The decryption of error codes according to the manufacturer's standard. It is possible to search for a fault code by error number, full decoding of the code, or any match in the decoding. View of extended firmware IDs is available.
The module does not work for checksums corrections.
Reading and writing firmware files in the ECU is recommended to be done using the programmer AutoVEI TruckExplorer (license MR, MR+).

MAN with ECU EDC17CV42

Base versions of the software supported (P700_5_5_1, P700_6_6_1, P700_6_9_2)

Calibration-Engine type:

SW_06X7Z49D-ENG_D2676LF26
SW_21XC548D-ENG_D2676LF25
SW_06X889M-ENG_D2676LF46
SW_06XLP79-ENG_D2676LF45
SW_06XZZ18-ENG_D2676LF46
SW_06XB5N8D-ENG_D2676LF53
SW_06XB5P4D-ENG_D2676LF53
SW_06XB5P8D-ENG_D2676LF53
SW_06XB5R2D-ENG_D2676LF53
SW_06XB5ROD-ENG_D2676LF53
SW_06XTC17D-ENG_D2676LF53
SW_06XTC21D-ENG_D2676LF53
SW_06XTC24D-ENG_D2676LF53
SW_06XTC35D-ENG_D2676LF53
SW_06XTC63D-ENG_D2676LF53
SW_06XTC74D-ENG_D2676LF53
SW_06XUM51D-ENG_D2676LF52
SW_06XVD92D-ENG_D2676LF52
SW_24XP321D-ENG_D2676LF52
SW_24XP322D-ENG_D2676LF52
SW_24XP613D-ENG_D2676LF52