Autovei Truck explorer version v6.20

What's New in Version 6.20 (Build 17131) Stable Release as of July 5, 2022:

MCM2.1 (HW: D4 or D5) Blocked:

MCM2.1 DC License or MCM2.1 OBD License;
Read/Write operations via OBD/DC (online required!);
Online mode only;
No need to open the ECU;
Reading (PFLASH+DFLASH (4160KB), EEPROM) does not require tokens;
Writing in DC/OBD mode using tokens (PFLASH (4096KB) - 10 tokens, PFLASH+DFLASH (4160KB) - 40 tokens, EEPROM - 10 tokens).
Free recovery in BSL mode. Unlocking 10 tokens. (ATTENTION: Only the last functional PFLASH+DFLASH can be written!)

MCM2.1 (HW: D1, D2, D3), MCM2;

Read/Write operations (TC1797) via OBD/DC;
Requires the corresponding ECU license (DC/OBD/BSL);
No need to open the ECU;
Offline mode;
Reading (PFLASH+DFLASH (4160KB), EEPROM (32KB)) does not require tokens;
Writing in DC/OBD mode using tokens (PFLASH (4096KB) - free, PFLASH+DFLASH (4160KB) - 30 tokens, EEPROM - free).
Free recovery in BSL mode. In some cases, it may be necessary to open the ECU.

ACM2, ACM2.1:

Read/Write operations (TC1796) via OBD/DC;
Requires the corresponding ECU license (DC/OBD/BSL);
No need to open the ECU;
Offline mode;
Reading (PFLASH+DFLASH (2176KB), EEPROM) does not require tokens;
Writing in DC/OBD mode using tokens (PFLASH (2048KB) - free, PFLASH+DFLASH (2176KB) - 30 tokens, EEPROM (32KB) - free).
Free recovery in BSL mode. In some cases, it may be necessary to open the ECU.

TCM:

MB TCM License;
No need to open the ECU for OBD/DC mode;
ECU must be opened for JTAG mode. No tokens required for writing. (ATTENTION: Some TCMs do not have JTAG, so if you write an incorrect ECU dump, it will become unusable!);
Reading (PFLASH, EEPROM) does not require tokens;
Writing in DC/OBD mode using tokens (PFLASH - 20 tokens, EEPROM - 20 tokens).
VIN TCM Change (5 tokens)
Added display of TCM immo system information (FBS3 or FBS4).

EIS:

Added display of FBS4 keys system information.

EBS:

EBS Flash/EEPROM Read/Write License;
Supported ECUs:
Wabco EBS3/EBS4/EBS4+(Mercedes) MPC5554 - JTAG, DC, OBD;
Knorr-Bremse EBS5 (Mercedes) MPC562 - BDM/DC/OBD; (NEW)
Knorr-Bremse EBS5 (MAN) MPC562 - BDM;
Wabco EBS3 (Kamaz) MPC5566 - JTAG;


Knorr-Bremse EBS5 (MAN) parameter changes (VIN, EOL/tester information, part number/unprocessed part data; price 5 tokens each);
MB EBS3/EBS4 (Wabco) VIN Change (5 tokens)
Cables:
DC2U-EBS34 Cable for EBS3/EBS4 (MB)
DC2U-EBS-KZ Cable for Wabco EBS3 (Kamaz)
DC2U-EBS-KN-MB Cable for Knorr-Bremse EBS5
DC2U-EBS-KN-MAN Cable for Knorr-Bremse EBS5

CR4:

MB V-class CR4 (EDC16CP31) MPC564 / M58BW016xB;
MB CR4 License (for GPT mode);
Read/Write FLASH (internal (512KB) / external (2048KB)) in GPT mode;
Read key information (free);
Unpair (20 tokens);
DC2U-CR4 Cable.

CR60:

MB V-class CR60 (EDC17CP46) TC1797;
MB CR60 License (for GPT mode);
EDC17 BSL License (for BSL);
Read/Write FLASH (4160KB) in GPT mode;
Read/Write FLASH (4160KB) in BSL mode;
Read key information (free);
Unpair (20 tokens);
DC2U-CR60 Cable.

MAN MS6.1 (EDC7) FLASH Read/Write via OBD

VIN Change EIS (5 tokens)

License-free operation - KEY INFO reading.

Updated fault code descriptions for MB

Now we have a single ECU_EBS license instead of MB_EBS34_DC, MB_EBS34_JTAG, MB_EBS34_OBD.

Supported new ECU versions:

Added VCM version VCM_SW_WP8_rel55.

MAN EDC7C32 version 5.4 Added.

What's Fixed: "Detect control units" in the Android app caused "internal error"

MR parameters write (in some cases values restored back after ECU power off/on)

Scania faults read was improved (now more ECU are supported)

EBS Knorr-Bremse "Memory analyze" (was "internal error"; now we show it as "not supported")

If the main window with operation buttons does not fit on the screen, a scrollbar is shown

MR (CNG, type G1) memory operation (was "error 3.5")

MCM VeDoc fixed (was "internal error")

MAN faults read improved - some ECUs (EBS and possible others) were not properly detected.

MCM keys info (was "internal error")

CPC BSL FLASH read/write (FLASH read/write buttons were disabled)

TCM unpairing (was unavailable for immo systems other than FBS3)

Some EIS versions were not detected (hardware type was detected as "unknown")

Connect to the device on some new Android v12 phones now works ok (was error "device not found" immediately)

CPC/CPC4 (Kamaz/Mercedes bus/Freightliner) via DC connect was ok but other diagnostic operations failed with "error 3.5"

Some CPC3 versions were not detected correctly (showed "hardware version: unknown" during connect)

Connect to Mercedes bus via OBD (was "error 0.3")

NEW!!! MB EBS5 (Knorr) parameters write fixed (was "error 3.5")

NEW!!! MB TCM (Wabco, Bosch) keys information for some ECUs (was "error 3.5