Autovei Software Updates, version 7.2
All V6 and V7 devices with active update/support subscriptions will be automatically updated to software version 7.2 and will gain access to the latest features!
16 May 2023
Here are the new features and fixes in software version 7.2 (2023-05-16):
New Features:
-
Operations with Scania COO7 flash memory via DC/OBD (EEPROM is not supported). Requires SCANIA COO7 license.
Mercedes UCV-FR (Brazil) operations with BSL memory (requires MB_FR License and DC2U-UCV cable).
New ECU Versions:
-
CPC version 2700 (diagnostic version 2E) memory operations.
Fixes:
-
Now you can perform read/write operations on EDC7C32 & EDC17CV42 for tractors and marine applications in GPT mode via the "ECU" tab (no dump checks/corrections are performed, so use it at your own risk).
Correctly identified Iveco MD1CE101 (previously identified as MD1CE100).
Fixed "Add Keys" for MR via DC (previously returned "Key Not Present" error).
MAN EDC7C32/EDC7C3 equipment class identification via DC/OBD fixed (sometimes EDC7C32 was identified as EDC7C3).
Corrected the red CAN speed for Scania COO7 via DC (previously showed green CAN speed).
MB EIS connection information fixed (sometimes serial number and equipment part number showed all FF).
Fixed Iveco/Kamaz EDC7UC31 GPT connection (always had "Error 3.5").
FR connection via OBD on older Mercedes trucks fixed (sometimes not detected).
Show the correct error "Unsupported ECU Version" for memory operations on unknown CPC versions (previously "Error 3.7").
BDM FLASH write operations are now more stable.
EDC7UC31 from CLAAS should now connect (use the "CLAAS" or "IVECO" tab).
EHZ BSL fixed; FR/CPC via OBD connection fixed.
FR connection via OBD fixed.
MAN PTM-EDC7, FFR-EDC7 pairing (previously "Error 0.3").
FR connection via OBD is now more stable (sometimes it was not detected).
CPC RTC write fixed (previously "Invalid User Input" error).
Note: All V6 and V7 devices with active update/support subscriptions will be automatically updated to software version 7.2 and will gain access to the latest features!